LegalRecoveryLegalRecovery Home
IND-25•Metal Scrap & Rolling Mill Recovery Playbook

Induction Furnace Melted Your Scrap Truckload in 12 Hours—and Now Withholds ₹45 Lakh Blaming 'Excess Slag / Recovery Loss'?

Executive Creditor AnswerUnder Section 42 of the Sale of Goods Act, 1930, melting HMS, shredded, or non-ferrous scrap in an induction furnace extinguishes all buyer rejection rights. Part of our IND-25 Mining, Fuel & Metal Scrap Recovery Hub, this playbook pairs Dharamkanta slips with urgent Order XXXVIII Rule 5 attachment before banks seize distressed mills.

₹25L–₹80L

Single Scrap / Ingot Truckload

1.5%–3%

Thin Trading Margin wiped by 1 default

Section 42

Furnace Melting = Irrevocable Acceptance

Order 38 R.5

Urgent Billet & Receivable Attachment

1

Why Scrap Traders Lose 1.5% Margins Inside Induction Furnaces

Ferrous Heavy Melting Scrap (HMS 1&2), shredded scrap, sponge iron, and high-value non-ferrous lots—copper wire, brass honey, SS 304/316, and aluminium ADC-12 ingots—trade on razor-thin 1.5% to 3% gross margins. Whether supplying from Mumbai/Nhava Sheva import yards, Mundra, Kandla, or Alang ship-breaking plots, traders commit ₹25 Lakh to ₹80 Lakh per truckload against 24-hour RTGS or 7-day bill terms.

Because a single defaulted copper or HMS truckload wipes out the net profit of 40 to 50 clean dispatches, rolling mills and induction furnaces in Mandi Gobindgarh, Jalna, Raipur, Bhiwadi, and Muzaffarnagar exploit a predictable liquidity tactic: they unload the vehicle, pass the Dharamkanta weighbridge, charge the scrap into the furnace within 12 hours, and then withhold payment 15–30 days later blaming “excess slag, rust, or recovery loss.”

Critical Distress Window: When an induction furnace stops honouring 24-hour RTGS commitments, weeks—not months—determine recovery. If a scrap supplier waits 60 days sending informal broker reminders, secured consortium banks invoke SARFAESI Act Section 13(2)/(4) and seal the plant, relegating unsecured scrap creditors behind bank collateral. Early Advocate Legal Notices paired with PDC Section 138 action move your claim to the front of the queue.
2

5-Step Scrap Truckload & Furnace Recovery Decision Tree

Execute this 30-day escalation ladder the moment a 24-hour RTGS or 7-day rolling mill invoice turns overdue, before the plant's finished billets are cleared or attached by secured lenders.

Step 1 • 01. Freeze Evidence (Day 0–2)

Lock Dharamkanta slips, E-Way Bill, FASTag & gate unloading photos under BSA s.63.

Step 2 • 02. Bar Slag Excuses (Day 3)

Serve s.42 Sale of Goods notice: furnace melting = irrevocable acceptance.

Step 3 • 03. Present PDCs (Day 7–15)

Intimate ledger balance & present security cheques to trigger NI s.138/143A.

Step 4 • 04. Attach Stock (Day 15–30)

File Order 37 + Order 38 Rule 5 ABJ on billets/ingots before bank seizure.

Step 5 • 05. IBC / ODR Exit (₹1Cr+)

Issue IBC Form 3 Demand Notice or batch CSV notices for priority payout.

3

Statutory Matrix: Sale of Goods s.42, Order 38 Rule 5 & s.138

Match the rolling mill or foundry's exact delay tactic to the statutory remedy that blocks triable defences and attaches liquid assets fastest.

Mill / Buyer ExcuseGoverning StatuteMandatory ProofCreditor RemedyAction Window
Furnace Melts Scrap in 12–24 Hrs, Then Raises Slag / Burning-Loss DebitSale of Goods Act, 1930 s.42Origin + Mill Dharamkanta Slips, Gate Register & Furnace Heat-LogConsumption Estoppel Bar + Order XXXVII Summary Suit7-Day Notice / 45–90d Suit
LME / MCX Price Dip Triggers Copper, Brass or Aluminium Rate-Cut DemandSale of Goods Act ss.26, 42 & 61XRF/OES Assay Slip + WhatsApp Rate Lock + Signed BiltyFull Contract Price + 24% p.a. Commercial Interest7-Day RTGS Demand
Distressed Rolling Mill Strips Billets Before Bank SARFAESI SeizureCPC Order XXXVIII Rule 5 + Order XXXVIINight-Clearance Proof, Electricity Arrears & Peer DefaultsUrgent Attachment Before Judgment (ABJ) & Garnishee Freeze3–14 Days Interim Relief
Dishonoured 24-Hr / 7-Day RTGS Security PDCs by Mill DirectorsNI Act, 1881 ss.138, 141 & 143AOriginal Cheque, Bank Return Memo & Prior Ledger IntimationCriminal Summons vs. Directors + 20% Interim Deposit30d Notice + 15d Cure
Buyer Alleges 'GST Fake Invoice / ITC Mismatch' to Freeze ₹40L+ LedgerCGST Act s.16(2) + BSA 2023 s.63E-Way Bill Part-B, FASTag Toll Log, Gate CCTV & GSTR-1/2BEstoppel Against Buyer + Commercial Court Recovery15-Day Pre-Suit Notice
4

4 Metal Scrap & Ingot Default Playbooks (Interactive)

Select your exact dispute profile—post-melting slag deductions, LME/MCX copper rate-drop rejections, GST ITC accusations, or distressed plant asset stripping.

Sale of Goods Act s.42 | BSA 2023 s.63 | Order XXXVII CPC

Induction Furnace Melts HMS / Shredded Scrap in 12 Hours—Then Deducts ₹12–₹45L for 'Excess Slag'

Commercial Failure Mode

Rolling mills and induction furnace units in Mandi Gobindgarh, Jalna, Raipur, and Bhiwadi unload 25–35 MT Heavy Melting Scrap (HMS 1&2) or sponge iron, clear the Dharamkanta weighbridge, and charge the crucible within 12–24 hours. Two weeks later, when the 24-hour RTGS or 7-day bill matures, the mill issues a unilateral debit note alleging '8% excess slag, rust, or recovery loss'—after no physical scrap remains to inspect.

Creditor Statutory Counter

Under Section 42 of the Sale of Goods Act, 1930, a buyer is deemed to have accepted the goods when they perform any act in relation to the goods inconsistent with the ownership of the seller—such as melting, smelting, or blending the scrap into billets/ingots. Once the scrap loses its separate identity in the induction furnace without a pre-melting joint inspection memo, the right of rejection is statutorily extinguished.

3-Step Enforcement Action Plan

1

Lock Weighbridge, Gate-Camera & Toll Trail

Compile the origin and destination Dharamkanta slips, GST E-Way Bill Part-B vehicle timestamp, highway FASTag crossings, and mill gate-entry slip showing unconditional unloading.

2

Invoke Sale of Goods Act s.42 Consumption Estoppel

Serve an Advocate Demand Notice putting the mill on notice that charging the furnace constitutes irreversible statutory acceptance under s.42, barring any post-melting slag or burning-loss debit.

3

File Order XXXVII Summary Suit on Tax Invoice + Ledger

Pursue liquidated invoice recovery under Order XXXVII CPC where the buyer has no triable defence once physical delivery and furnace consumption are established.

5

Worked Recovery Ledger: ₹45 Lakh HMS & Copper Scrap Default

Illustration of a single 32 MT HMS/copper-alloy dispatch on 24-hour RTGS terms where the rolling mill melted the lot and raised an unsubstantiated 12% slag deduction 18 days later:

Unpaid Principal & Statutory Interest

Tax Invoice Value (32 MT + 18% GST)₹45,00,000
Disputed Post-Melting Slag Debit (Barred s.42)₹0 Allowed
Contractual / s.61 Interest (24% p.a. × 90d)+ ₹2,66,301
Total Recoverable Claim₹47,66,301

Parallel Leverage & Margin Protection

  • Trader Net Margin at 1.5%: Only ₹67,500 profit on a ₹45L load—meaning absorbing a 12% slag cut (₹5.40L) destroys 8x your entire trade margin.
  • NI Act s.143A Interim Relief: On a dishonoured ₹45L security PDC, the Magistrate can order 20% interim compensation (₹9,00,000) within 60 days of plea.
  • Order 38 Rule 5 Security: Attaching ~75 MT of finished MS billets or aluminium ingots in the mill yard secures 100% of the principal before bank SARFAESI action.
6

BSA 2023 s.63 Weighbridge, E-Way Bill & Furnace Checklist

Assemble these eight records before serving your Advocate Legal Notice or moving Commercial Court for Order XXXVII / Order XXXVIII Rule 5 relief:

  • 1Origin & Destination Dharamkanta Weighbridge Slips: Preserve gross, tare, and net weight printouts with timestamped vehicle registration numbers.
  • 2GST E-Way Bill (Part-A & Part-B): Download portal PDFs showing exact dispatch time, HSN code (7204 ferrous / 7404 copper / 7602 aluminium), and transporter ID.
  • 3Highway FASTag & GPS Fleet Logs: Export toll-plaza crossing timestamps proving uninterrupted physical transit from port/yard to the mill's industrial belt.
  • 4Mill Gate-Entry Register & Security CCTV Frame: Retain driver-signed gate passes and timestamped unloading photos inside the buyer's scrap bay.
  • 5Pre-Dispatch XRF / Spectrometer Assay Report: Attach chemical purity certificates for non-ferrous copper, brass, SS 304/316, and aluminium ADC-12 ingot lots.
  • 6WhatsApp / Email Rate-Lock & 24-Hour RTGS Terms: Export complete chat threads confirming grade, rate per MT, and 24-hour/7-day payment commitment.
  • 7GSTR-1 & GSTR-2B Tax-Paid Reconciliation: Prove tax remittance and buyer ITC availment to demolish bad-faith 'bogus billing' excuses.
  • 8BSA 2023 Section 63 Electronic Certificate: Execute a signed s.63 certificate covering all digital weighbridge, FASTag, GST portal, and WhatsApp records.
7

Serve 1 Pilot Notice (₹999) or Upload Mill Defaulter CSV

Act within the critical pre-SARFAESI window: test our Advocate-drafted notice on one overdue rolling mill today, or upload your entire yard's overdue ledger via Representee CSV.

Track 1 • Single Mill / Foundry Pilot Notice

Test 1 Live Overdue Case Now (&rupee;999· Advocate Drafted)

Dispatch a formal Sale of Goods s.42 Furnace-Melting Estoppel, Dharamkanta Proof & Order 38 Rule 5 Warning Notice via Email + WhatsApp + Speed Post RPAD before banks seize the plant.

Self-Serve Intake →
Track 2 • Scrap Importers, Yards & Ingot Traders

Have 10 to 10,000+ Defaulters? Upload CSV / Activate Institutional Desk

Built for metal scrap yards and non-ferrous importers across Mandi Gobindgarh, Jalna, Raipur, Bhiwadi, and Alang: batch-upload overdue mill ledgers and track NI s.138 & Order 37 escalations.

8

IND-25 Hub, Calculators, Templates & Recovery Guides

9

FAQs: Ferrous, Non-Ferrous Scrap & Rolling Mill Recovery

Can an induction furnace deduct money for 'excess slag or burning loss' after melting our scrap?+
No. Under Section 42 of the Sale of Goods Act, 1930, a buyer is deemed to have accepted the goods once they perform any act inconsistent with the seller's ownership—such as charging HMS, shredded scrap, or sponge iron into a furnace. Without a pre-melting joint inspection memo, post-melting slag or recovery-loss debit notes are legally barred.
What if a copper, brass, or aluminium buyer rejects or cuts rates after an LME/MCX price drop?+
Under Sections 26 and 42 of the Sale of Goods Act, 1930, risk and property in ascertained scrap or ingots pass upon weighbridge/gate delivery. A 4%–8% LME or MCX market correction after dispatch does not entitle a foundry to withhold RTGS or impose unilateral rate cuts; the supplier can claim full invoice value plus Section 61 commercial interest.
How can we stop a distressed rolling mill from stripping billets before secured banks seize the plant?+
Move urgently for Attachment Before Judgment (ABJ) under Order XXXVIII Rule 5 of the Code of Civil Procedure, 1908 alongside an Order XXXVII Commercial Summary Suit. Courts can attach finished billets, TMT bars, aluminium ingots, or third-party buyer receivables when asset dissipation or impending SARFAESI action is demonstrated.
How do genuine scrap suppliers defeat false 'GST fake invoice' or ITC mismatch excuses?+
Present a certified physical-movement dossier under Section 63 of the Bharatiya Sakshya Adhiniyam, 2023: GST E-Way Bill (Part-A and Part-B vehicle details), origin and destination Dharamkanta weighment slips, highway FASTag logs, gate-entry CCTV timestamps, and GSTR-1/2B tax-paid records. Once the buyer has claimed ITC under CGST Act s.16, denying physical receipt is estopped.
Are post-dated security cheques taken from rolling mill directors enforceable under Section 138?+
Yes. Security cheques issued against ongoing scrap or ingot supply become enforceable once a crystalized invoice debt exists on the date of presentation. Presenting the cheque after prior written ledger intimation and serving a 15-day statutory demand notice within 30 days of the bank return memo triggers NI Act s.138 prosecution and up to 20% interim compensation under s.143A.
Which industrial clusters see the highest scrap and ingot payment defaults in India?+
High-velocity defaults concentrate in induction-furnace and secondary-steel hubs including Mandi Gobindgarh (Punjab), Jalna (Maharashtra), Raipur and Bilaspur (Chhattisgarh), Bhiwadi (Rajasthan), Muzaffarnagar (UP), Alang/Bhavnagar (Gujarat), and Chennai/Coimbatore foundry belts, where ₹25L–₹80L truckloads trade on 24-hour RTGS or 7-day credit.
Can a scrap importer or yard recover multiple unpaid truckloads across 20+ mills at once?+
Yes. Importers and regional yards can onboard as an institutional Representee on LegalRecovery.in, upload a single CSV of defaulting mills with E-Way Bill and weighbridge references, and dispatch synchronized Advocate Legal Notices via Email, WhatsApp, and Speed Post RPAD in one batch.
10

Official Statutory Portals & Bare Act Authorities

Contextual Legal Library

Coal, Petcoke, Metal Scrap, Fuel & Mineral Recovery Resources

View All Legal Notice Categories →